|
Evolution
Automated Hematology System
Specifications:
System Software:
The Evolution uses powerful but user friendly
software. Every operator request such as counting, retrieveing results from
the memory, QC calibration or printing is only a few key strokes away
Patient
identification: 9 digit keypad entry
Patient data storage: 200 results with histograms
Report format: User selectable
Calibration: Automatic or manual
Units: The user can select MKS, SI, SI modified, or Chinese
Patient normal range: User defined
Patient action limits: User defined
Quality Control:
A comprehensive onboard QC package allows optimal monitoring of system
performance. The Evolution allows two lots with three levels each. Up to one
result for each level per day for 100 days or a maximum of 300 results for
each lot can be stored onboard. QC data can also be viewed in a monthly
Levy-Jennings plot. A log of QC data with automatic calculation of mean, SD
and CV can be printed.
Operation alerts:
Evolution users get full feedback on operation of the system and sample
being analyzed with a range of diagnostic alerts.
Maintenance: To monitor maintenance of the system a
maintenance log is available.
|
|
Evolution Automated
Hematology System
Features
 |
Accepts most commonly used closed
collection tubes |
|
|
16 parameters with 3 histograms
|
|
|
Innovative capillary mode, no need for
external pre-dilution |
|
|
60 samples per hour in closed tube mode
|
|
|
Sample size flexibility satisfies a
wide range of end user requirements
|
|
|
Large LCD with histograms on screen
|
|
|
User friendly operator interface
|
|
|
Data management stores up to 200 sample
records with histograms. |
Scientific Principle:
Electrical resistance for cell counting and sizing (WBC, RBC, Plt).
This is combined with optical absorbance of cyanmethemoglobin for
hemoglobin.
The technology combines to give a full CBC with 3 part differential in just
under one minute.
Sample Handling:
Blood samples must be collected in EDTA tubes.
The following sample sizes
are required:
Direct Mode: 70µL whole blood using closed or open tube
mode.
Capillary Blood : 25µL whole blood.
Dilution system:
In order to maximize performance and reduce instrument down-time a high
precision ceramic shear valve and computer controlled reagent dispenser are
used. Automatic rinse inside and outside of the sample probe prevents
carryover and reduces risk of transmission of blood borne pathogen to
operators.
Throughput :
60 samples per hour in direct sampling mode
Reagent Packs:
EVO-PAC 200 : approximately 200 tests per pack at 10 samples per day,
depending on lab operating procedures.
EVO-PAC LV (for low volume laboratories) : approximately 100 tests per pack
at 5 samples per day, depending on lab operating procedures.
Interested in buying
or learning more about this piece of equipment?
Please
click here to fill out our
contact page or contact our knowledgeable sales force at
763-712-8717 / 800-745-2710 for more information.
GMI carries
the complete
Drew Scientific Product Line
2280 Fully
Automated CBC System
D3 Automatic Hematology System
DS5 HbA1c
Measurement System
Excell™ 22
5 Part
Auto Hematology Analyzer
Hemavet 950 Veterinary 5 Part WBC
Hemavet 1700
Trilogy Chemistry, ELISA, Coagulation System
|
