Stat Fax 1904 Plus Chemistry Analyzer
 

Bichromatic optical system with six wavelengths including 340nm

Pre-programmed calculations for both kinetic and endpoint assays

Twelve-station 37°C incubation block and temperature controlled read cell

Easy to use with step-by-step prompting and built-in thermal printer with graphics capability

Large non-volatile memory to store more than 50 curves and test parameters.

Stat Fax 1904 Plus
Chemistry Analyzer

Photometric
Linear Measurement Range: -0.20 to 2.50 Absorbance Units (A)

Photometric Accuracy: +/- (1% of the reading + 0.005 A)

Stability: Drift of no more than 0.005A in 8 hours/bichromatic

Light Source: Tungsten halogen lamp, with lampsaver feature

Standard Wavelengths: 340, 405, 450, 505, 545, 600nm

Type of Filter: Multiple cavity hardcoat influence. 10nm half bandpass

Tube Size: Std. is 12 mm round

Electronic:
Display: Alpha nmeric, 16 character LCD

Printer: Thermal, dot matrix, 20 characters per line, plus graphics

Keyboard: 16-key, domed membrane swith, enunciating

Power Requirements: 115V or 230V AC, 50-60 Hz (switch selectable)

Microprocessor: Z80A or Z180

Software
Speed: Reads, calculates and prints results in 3 seconds/tube

Calculation Modes: Single point calibration by standard or factor, multipoint calibration with point-to-point curve fit, rate by standard or factor (batch or singly)

Test Menu: More than 50 open channels to store tests. Stores all parameters including wavelengths, calculations, unit codes, linear and normal ranges, rate timing, standard values, test names, and previous standard curve.

Other
Temperature: 37°C, block stays on, cell has on/off switch

Enclosure: Painted flame retardant ABS plastic cover with metal base.

Dimensions: Approximately 9.x x 13.25 x 4875 in. (24 x 34 x 13 cm) 10 lbs. (4.5 kg)

Certifications: CE Mark

  GMI, Inc.
  6511 Bunker Lake Blvd.  
  Ramsey, Minnesota, 55303   USA
  Tel. 763-712-8717    Fax 763-712-8724 
  Send electronic mail to richard@gmi-inc.com