CelCulture® CO2 Incubator Esco CCL-170B-9

CelCulture® CO2 Incubator Esco CCL-170B-9

Esco Global

VivoCell™ Precise Temperature, CO2 Control and High Humidity

  • Best uniformity and control among available CO2 Incubators
  • Fast CO2, temperature and humidity recovery without overshoot.
  • Direct heat design for rapid recovery, with 8 heater grouped into 3 zones.
  • Air jacket provides isolation against ambient temperature fluctuations.
  • Filtered air circulates across water pan accelerating humidifying process and flows gently around culture plates, causing no disturbance to cell culture.
  • Blower automatically stops when door is opened, to minimize mixing of chamber and room air. VentiFlow™ forced convection. accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination.

User-friendly software interface: Easy to Monitor and Easy to Service

  • Comprehensive user-configurable alarms for all the parameters.
  • CelAlert™ alarm system reminds user to replace CO2 tank and ULPA filter.
  • Intelligent data and event logger records all incubator parameters for on screen recall.
  • 16 MB built-in flash memory guarantees long term storage of data.
  • Diagnostic interface in microprocessor include historical read parameter read-outs and online quick help provide comprehensive solutions to problems.
  • Esco electronics and sensors have been expertly designed and paired to be inherently drift-free, to minimize need for calibration


  • Chamber is made of stainless steel chamber with rounded corners enabling efficient and rapid cleaning.
  • Ductwork, plenums and shelves are removable without tools for faster and easier operator maintenance.
  • Glass door and inner gasket are removable without tools.

For more information or to place an offline order call 1-800-745-2710


We Accept Trade-ins!

Don’t forget to tell us about any unused

instruments taking up space in your lab.


The CelCulture® CO2 Incubator is designed and manufactured using the accumulated expertise and knowledge that Esco has developed with over 35 years of world class equipment for laboratory usage. Designed with sample safety, energy efficiency and user-friendliness in mind, the system achieves precise parameter controls, highly effective contamination control and intuitive user interfaces all--supported by Esco's solution-based sales and service representatives worldwide.

  • Contamination control with long life ULPA filters and 90°C moist heat decontamination cycle.
  • Direct heat & air jacket design with gentle yet effective forced convection.
  • Intuitive interfaces and intelligent data and event logger.


  • CelSafe™ Contamination Control System provides unparalleled protection to your precious samples
  • SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 conditions.
  • All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
  • The incubator’s main body is made from electro-galvanized steel with Esco’s unique ISOCIDE™ antimicrobial coating.
  • SwiftCon™ moist heat 90?C decontamination cycle operates overnight to eradicate contamination in the unlikely event it occurs. At the end of the cycle, the chamber is dry and ready to use.
  • CelAlert™ Alarm System reminds users of important tasks needed to protect their cultures
  • CO2 tank depletion reminder in addition to CO2 tank-low alarm.
  • ULPA-reminder will alert user to replace ULPA filter.
Model Name Description
CCL-170B-9 CelCulture® CO2 Incubator, 170L, IR Sensor, CO2 Control, ULPA,
High Temp Decon, 115VAC, 50/60HZ
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements

Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1 Service Visit
Service Visit 1PM
1 Service Visit
1 2
Parts and Labor    

Discounted Parts
Discounted Labor (As needed)

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.


Your trusted source for new, factory clearance & certified pre-owned lab instruments since 1995.

  • We routinely save discerning laboratories 30-80% with our recertified pre-owned and factory clearance instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - proof that your instruments pass through a rigorous re-certification process to ensure that it arrives at your laboratory defect-free and in full working order.
We are neither an auction company nor an instrumentation broker. GMI employs our own factory-trained engineers to ensure full control of this process.
Unlike small-time businesses and brokers, GMI goes beyond offering money-back promises. We offer real product warranties.
Apart from our meticulous inspection processes, GMI’s available warranties and multi-year service agreements guarantee customer satisfaction - no need to go through frustrating and time-consuming product returns!
Additionally, all items are thoroughly cleaned and professionally packaged/crated with care to insure they arrive in your lab ready for use.