Dissolved Gas Analyzer GC

Dissolved Gas Analyzer GC

SKU#:
8331-10-0023
  • HID, FID and/or TCD Detectors
  • Built-in PeakSimple data system
  • Built-in Standards Preparation Module—make your own standards
  • 10-port gas sampling valve
  • Gas extraction loop on the compact 8610C chassis

For more information or to place an offline order call 1-800-745-2710

OR

We Accept Trade-ins!

Don’t forget to tell us about any unused

instruments taking up space in your lab.

Description

Capillary FID GC System is a state of the art, general purpose temperature programmable GC in a compact, low-cost package. It includes The DGA GC System from SRI Instruments is designed to make dissolved gas analysis easier ands less expensive than other methods. No sample preparation is necessary prior to injection into the DGA GC; this helps to avoid contamination made possible by transferring the sample between various containers. The DGA GC may also be used online. For example, you could place the sample inlet tube directly into the ocean and analyze the dissolved gases in seawater.

In the SRI Instruments DGA GC, the sample is injected by peristaltic pump through a unique gas extraction loop. The gas extraction loop consists of permeation tubing encapsulated in a trap-heated glass tube. The permeation tubing is plumbed to the sample inlet, the 10-port gas sampling valve and the waste/sample outlet.

When the sample is pumped through the gas extraction loop, the dissolved gases permeate through the membrane into the extraction chamber. Solenoid valves are included for purging the gas extraction loop with helium between runs.

By reconnecting a few tubing lines, the DGA GC can be configured to prepare dissolved gas standards. A Tedlar bag, or other container, filled with gas standard of a known concentration is connected to the standard pump. The standards preparation vessel is filled with sample liquid, such as sea water or waste water. The standard pump bubbles gas standard into the standards preparation vessel, equilibrating the liquid over time to the known concentration.

Equlibration takes about one hour.

Solubility of Gases in Water at 1%: Hydrogen 0.016 ppm Oxygen 0.43 ppm

To obtain these chromatograms, the DGA GC standards preparation module was used to create 13 ppb hydrogen gas by weight in water: 1% hydrogen gas standard was pumped through water in the standards preparation vessel for a length of time sufficient to achieve equilibration. The water in the standards preparation vessel was then pumped into the gas extraction loop and run as the sample. The TCD quantifies the large oxygen and nitrogen peaks, while the sensitive HID detects hydrogen down to 13 ppb.

Available Models: 8610-0035 DGA GC System with HID detector, 1 channel data system, 115VAC $ 15,959.00 8610-0036 DGA GC System with TCD & HID detectors, 6 channel data system, 115VAC $ 18,019.00

Services
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements


Bronze
Prevention
Plus
Silver
Assurance
Plus
Gold
Safety
Plus
Platinum
Premium
Plus
PM
Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1PM
or
1 Service Visit
Service Visit 1PM
or
1 Service Visit
1 2
Travel
Parts and Labor    

1 YEAR
Discounted Parts
Discounted Labor (As needed)
Parts

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.

WHY BUY FROM GMI?

Your trusted source for new, factory clearance & certified pre-owned lab instruments since 1995.

  • We routinely save discerning laboratories 30-80% with our recertified pre-owned and factory clearance instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - proof that your instruments pass through a rigorous re-certification process to ensure that it arrives at your laboratory defect-free and in full working order.
We are neither an auction company nor an instrumentation broker. GMI employs our own factory-trained engineers to ensure full control of this process.
Unlike small-time businesses and brokers, GMI goes beyond offering money-back promises. We offer real product warranties.
Apart from our meticulous inspection processes, GMI’s available warranties and multi-year service agreements guarantee customer satisfaction - no need to go through frustrating and time-consuming product returns!
Additionally, all items are thoroughly cleaned and professionally packaged/crated with care to insure they arrive in your lab ready for use.