Fraction collector FOXY R1

Fraction collector FOXY R1

  • one-rack fraction collector
  • sturdy cast Aluminium Frame
  • user-friendly Touchscreen Display
  • built-in Ethernet and RS-232 communication capabilities
  • faster tube changes
  • µl delay volume between diverter valve and drop former
  • flow rates to 25 ml/minute

For more information or to place an offline order call 1-800-745-2710


We Accept Trade-ins!

Don’t forget to tell us about any unused

instruments taking up space in your lab.


The Foxy® R1 is the improved successor of the well-known Foxy® Jr. and can be used for a variety of applications. The Foxy® R1 accomodates the same rack types as its predecessor, but provides faster operation, more control options (RS-232 and Ethernet) and features an integrated diverter valve as a standard.

When connected to a detector, the Foxy® R1 offers slope detection, level sensing, and a combination of these methods.

The applicable rack types range from 96-well microplates, to test tube racks, to funnel racks for virtually unlimited collection volumes.

The Foxy® R1 is biocompatible and can be used in cold room environments.

Fraction collection
Number of racks1
Detection channels2
RFID rack recognition1
Capillary connection1/16"
Fractionation modesdrop counting, time intervals, volume intervals
Fractionation flow ratemax. 25 ml/min
Fraction capacity12 mm diameter tubes (144/rack), 13 mm diameter tubes (144/rack), 16 mm diameter tubes (100/rack), 18 mm diameter tubes (72/rack), 25 mm diameter tubes (36/rack), 1.5 ml microcentrifuge tubes (60/rack), 50 ml centrifuge tubes (36/rack), 28 mm diameter scintillation vials (36/rack), 96-well microplates (up to 6 plates total), MiniVials (72/rack), Funnel racks for fractions larger than 480 ml
Diverter valvedrop former (NC): 110 µl
waste (NO): 130 µl
Delay volumediverter valve located at drop former for µl delay volume. compensation only required for length of tubing to the diverter valve.
Wetted materialsvalve: PEEK and perfluoroelastomer (FFKM), supplied ferrules: ETFE, supplied valve tubing: PTFE, supplied drain tubing: viny
Fractionation controloperator: front panel control via touch screen LCD
integrated systems: direct communication via Ethernet (TCP/IP) and RS-232 serial communications
Fractionation tubes12 mm diameter, 13 mm diameter tubes, 16 mm diameter tubes, 18 mm diameter tubes, 25 mm diameter tubes, 1.5 ml microcentrifuge tubes, 50 ml centrifuge tubes, 28 mm diameter scintillation vials, 96-well microplates, MiniVials
Maximum test tube height150 mm
ControlLAN, RS-232
Technical parameters
Displaytouch screen LCD displays
Ambient conditions0–40 °C, 32–104 °F
Power supply00–240 VAC, 50–60 Hz, max. 1 A
Dimensions311 x 330 x 355 mm (W x D x H)
Weight7.1 kg
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements

Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1 Service Visit
Service Visit 1PM
1 Service Visit
1 2
Parts and Labor    

Discounted Parts
Discounted Labor (As needed)

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.


Your trusted source for new, factory clearance & certified pre-owned lab instruments since 1995.

  • We routinely save discerning laboratories 30-80% with our recertified pre-owned and factory clearance instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - proof that your instruments pass through a rigorous re-certification process to ensure that it arrives at your laboratory defect-free and in full working order.
We are neither an auction company nor an instrumentation broker. GMI employs our own factory-trained engineers to ensure full control of this process.
Unlike small-time businesses and brokers, GMI goes beyond offering money-back promises. We offer real product warranties.
Apart from our meticulous inspection processes, GMI’s available warranties and multi-year service agreements guarantee customer satisfaction - no need to go through frustrating and time-consuming product returns!
Additionally, all items are thoroughly cleaned and professionally packaged/crated with care to insure they arrive in your lab ready for use.