Hitachi Micro Ultracentrifuge CS150FNX

Hitachi Micro Ultracentrifuge CS150FNX

Hitachi Ultras

The world’s fastest speed :   150,000rpm
The world’s greatest RCF : 1,050,000xg
himac state-of-art technologies have realized the above greatest performance and the quietest operating sound ‘’45 dBA’’ in its the unique floor-standing model. CS150FNX, as well as CS150NX, takes only 90 seconds to reach the world’s fastest speed 150,000rpm by himac original vacuumed drive unit. Now you can separate and purify protein, lipoprotein, cell organelle, DNA and RNA, also carbon nanotubes and other nano-sized particles, more efficiently than ever.

Good Design Award 2012 was awarded.

Make sure you purchase the right laboratory centrifuge unit for your application and industry. Follow our guide for expert tips on purchasing the perfect lab centrifuge at just the right price for you.Get Your FREE New Centrifuge Purchasing Guide Here.

For more information or to place an offline order call 1-800-745-2710


We Accept Trade-ins!

Don’t forget to tell us about any unused

instruments taking up space in your lab.

  • The Unique Floor-Standing Micro Ultracentrifuge
    This unique floor-standing model (440(W) x 520(D) x 910(H) ) is suitable to be installed at central and/ or shared laboratory devices, so that may laboratories can share CS-FNX series.

  • Powerful Imbalance Protection
    Samples need to be balanced within 5mm by visual check only. Non-contact imbalance sensor always monitors vibration of the rotor and drive shaft. In case of abnormal vibration, the sensor activates and stops operation immediately.

  • Quick Start-Up
    It takes just 8 seconds (minimum) to be ready for operation since power switch is turned on. Initial screen is displayed on the LCD panel during booting up the system.

  • Powerful Vacuum Pump
    Reaching time to high-vacuum status is reduced to half by optimized control of the oil diffusion pump. (comparing with our previous model)

  • Quiet Operating Sound “45dBA”
    This unusually quiet operating sound was realized by newly develop rigid-control drive system and sound absorbing structure design. It does not disturb your researching works in the laboratory.

  • Easy Operation with Touch-Sensitive LCD
    Color touch-sensitive LCD and GUI (graphic user interface) with high contrast against back screen in black color enable users to easily operate the system or select various menus and functions by touching the icon on the display. Of course, operation status is identified at a glance by intelligible screen design.

  • Easy Timer Setting and Actual Run Timer
    himac original RTC(real-time control) function makes timer setting easy (PAT.). What you need to do is simply set start time or finish time with running time. It is easier than conventional delay time setting timer. himac original Actual Run Timer starts when the set speed is attained (PAT.) and excludes acceleration time from the set time. It helps to precisely control the net run-time and obtain high-reproducibility separation. Of course, conventional run timer is selectable.

  • Data Communication
    USB port is equipped as standard specification. (CS150FNX and CS150NX only) The system records up to 100 operating histories in its memory (PAT.). So operating data can be output in CSV format through the USB port. Optional LAN board is also available. (CS150FNX and CS150NX only) You can link CS150FNX and/or CS150NX to your PC through Ethernet or internet. Optional software ‘‘himac LogManager Ver. 3.0 (network edition)’’ can be installed in your PC and operating history and data of CS150FNX and/or CS150NX can be easily managed by your PC.
Model CS150FNX CS120FNX
Max. speed (rpm) 150,000 120,000
Max.RCF (xg) 1,050,000 (S140AT rotor) 771,000 (S140AT rotor)
Speed control accuracy ±50 (5,000 to max. speed)
Max. capacity (nominal) 30ml x 6 tubes (S50A rotor)
Max. capacity (nominal)
(Swinging bucket rotor)
7ml x 4 tubes (S50ST rotor)
Timer 1 min. to 99 hrs. and 59 min. with HOLD and RTC (real-time control) function
Vacuum system Oil rotary vacuum pump and oil diffusion pump
Rotor temperature control range(ºC) 0 to + 40 (1 degree increment)
Rotor Cooling method Thermo-module cooling system (HFC-free)
Screen display Colour LCD (touch-sensitive)
Rotor setting method Self - locking rotor system (no special tool required)
Operation noise (dB(A))* 45 *Measured 1 meter from front
Max. heat dissipation into room (kW) 0.7 or less
Drive unit warranty 5 years
Dimensions (mm) 440 (W) x 520 (D) x 910 (H), height to table 790
Floor area (m²) 0.53 (750 x 700 ?)
Weight (kg) 105
Power requirements AC208, 220, 230, 240 V ±10%, 8 A ( 50/60 Hz), single phase
Standard IEC61010-2-020, EN61326, CE marking qualified
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements

Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1 Service Visit
Service Visit 1PM
1 Service Visit
1 2
Parts and Labor    

Discounted Parts
Discounted Labor (As needed)

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.


Your trusted source for new, factory clearance & certified pre-owned lab instruments since 1995.

  • We routinely save discerning laboratories 30-80% with our recertified pre-owned and factory clearance instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - proof that your instruments pass through a rigorous re-certification process to ensure that it arrives at your laboratory defect-free and in full working order.
We are neither an auction company nor an instrumentation broker. GMI employs our own factory-trained engineers to ensure full control of this process.
Unlike small-time businesses and brokers, GMI goes beyond offering money-back promises. We offer real product warranties.
Apart from our meticulous inspection processes, GMI’s available warranties and multi-year service agreements guarantee customer satisfaction - no need to go through frustrating and time-consuming product returns!
Additionally, all items are thoroughly cleaned and professionally packaged/crated with care to insure they arrive in your lab ready for use.