Hitachi Tabletop Micro Ultracentrifuge CS150NX

Hitachi Tabletop Micro Ultracentrifuge CS150NX

Hitachi Ultras

The world's fastest speed:150,000rpm

The world's greatest RCF:1,050,000xg

Hitachi centrifuge technologies have realized the above greatest performance and the guietest operating sound "45dBA 2 in its the most compact body *.
CS150NX takes only 90 seconds to reach the world' s fastest speed 150,000rpm by himac original vacuumed drive unit. Now you can separate and purify protein, lipoprotein, cell organelle, DND and RNA, also carbon nano tubes, more efficiently than ever.

Make sure you purchase the right laboratory centrifuge unit for your application and industry. Follow our guide for expert tips on purchasing the perfect lab centrifuge at just the right price for you.Get Your FREE New Centrifuge Purchasing Guide Here.

For more information or to place an offline order call 1-800-745-2710


We Accept Trade-ins!

Don’t forget to tell us about any unused

instruments taking up space in your lab.

  • The Most Compact Body
    The most compact body * (590(W) x 582(D) x 408(H) mm) does not occupy laboratory table. CS150NX carries the world greatest performance and many attractive and useful functions in its the most compact body *. Rotor chamber is allocated in a front part of the body with smooth sliding door, so that it is easy for operators to place a rotor. Touch-sensitive LCD panel with wide view angle is placed at a position and an angle for easy operation.PWM (pulse width modulation) motor control has realized substantial reduction in acceleration and deceleration time.
  • Powerful Imbalance Protection
    Samples need to be balanced within 5mm by visual check only. Non-contact imbalance sensor always monitors vibration of the rotor and drive shaft. In case of abnormal vibration, the sensor activates and stops operation immediately.
  • Easy Operation with Touch-Sensitive LCD
    Samples need to be balanced within 5mm by visual check only. Non-contact imbalance sensor always monitors vibration of the rotor and drive shaft. In case of abnormal vibration, the sensor activates and stops operation immediately.
  • Quiet Operating Sound "45dBA"
    This unusually quiet operating sound was realized by newly develope rigid-cotrol drive system and sound absorbing structure design. It does not disturb your researching works in the laboratory.
  • Quick Start-Up
    It takes just 8 seconds(minimum) to be ready for operation since power switch is turn on. Initial screen is displayed on the LCD panel during booting up the system.
  • Powerful Vacuum Pump
    Reaching time to high-vacuum status is reduced to half by optimized control of the oil diffusion pump. (comparing with our previous model.)
  • Easy Timer Setting
    himac original RTC (real-time control) function makes timer setting easy. What you need to do is simply set start time or finish time with running time. It is easier than conventional delay time setting timer.
  • Acurate Control of Net Run-Time
    The timer starts when the set speed is atteined by himac original actual run timer function (PAT.). It helps to precisely control of the net run-time and obtain high-reproducibility separation. Of course, conventional run timer is selelctable.
  • USB Interface (compatible to GLP/GMP)
    USB port is equipped as standard specificiation. Operating data can be output in CSV format. LAN port is also selectable. (option)
  • RCF Calculation and Display
    CS150NX eliminates many troublesome and time-consuming manual calculation. Also, you can start operation by entering g value, instead of running speed.
Model CS150NX
Maximum Speed (rpm) 150,000
Maximum RCF (x g) 1,050,000 (S140AT rotor)
Speed Control Accuracy (rpm) +/-50 (5,000 - 150,000)
Maximum Tube Capacity 30ml x 6 tubes (S50A rotor)
Maximum Tube Capacity
(Swing Rotor)
7ml x 4 tubes (S50ST rotor)
Timer 1 min. to 99 hrs. and 59 min.
with HOLD function, with RTC function
Rotor Temp. Control Range 0 - 40 degree C (1 degree increments)
Rotor Cooling Method Thermo-module cooling system (HCF free)
Rotor Setting Method Self - Locking System
Screen Display Colour LCD (touch-sensitive)
Operational Noise (dBA) 45 (1m front)
Heat Radiation Rate (kw) 0.7
Drive Unit Warranty 5 years
Dimensions (mm) 590 (W) x 582 (D) x 408 (H)
Footprint (m2) 0.50 (850 x 590)
Weight (kg) 97
Power Requirements AC220V, 230V, 240V +/-10% (50/60Hz)
Single phase, 8A (Maximum)
Standard Accessories Tool box and tool set, Instruction manual
Standard IEC61010-2-020, EN61326, CE Marking qualified
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements

Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1 Service Visit
Service Visit 1PM
1 Service Visit
1 2
Parts and Labor    

Discounted Parts
Discounted Labor (As needed)

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.


Your trusted source for new, factory clearance & certified pre-owned lab instruments since 1995.

  • We routinely save discerning laboratories 30-80% with our recertified pre-owned and factory clearance instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - proof that your instruments pass through a rigorous re-certification process to ensure that it arrives at your laboratory defect-free and in full working order.
We are neither an auction company nor an instrumentation broker. GMI employs our own factory-trained engineers to ensure full control of this process.
Unlike small-time businesses and brokers, GMI goes beyond offering money-back promises. We offer real product warranties.
Apart from our meticulous inspection processes, GMI’s available warranties and multi-year service agreements guarantee customer satisfaction - no need to go through frustrating and time-consuming product returns!
Additionally, all items are thoroughly cleaned and professionally packaged/crated with care to insure they arrive in your lab ready for use.