Hitachi Ultracentrifuge CP100NX

Hitachi Ultracentrifuge CP100NX

Hitachi Ultras

These general-purpose centrifuges have the highest performance in their class making them ideal for the wide range of separation tasks used in cell biology, biochemistry and molecular biology.

  • Automatic Rotor Life Management System 
  • Rotor life is maximized
  • Visual Balancing by non-contact imbalance sensor
  • Economy Mode * for energy saving
  • Operating History : Max. 5,120 logs
  • Programmed Operation : 1,000 programs
  • User Lockout (standard function)

* The mode works while drive unit and vacuum pump are stopped
** under in-house test condition

Make sure you purchase the right laboratory centrifuge unit for your application and industry. Follow our guide for expert tips on purchasing the perfect lab centrifuge at just the right price for you.Get Your FREE New Centrifuge Purchasing Guide Here.

For more information or to place an offline order call 1-800-745-2710


We Accept Trade-ins!

Don’t forget to tell us about any unused

instruments taking up space in your lab.


Automatic Rotor Life Management System 

Total run times and total accumulated operating hours are managed automatically by the system. The RLM sensor of the ultracentrifuge reads the latest information of total nun times and total accumulated operating hours from the RLM adapter during the acceleration and the latest information of total run times and total accumulated operating hours are recorded in the RLM memory assembled on the rotor during the deceleration.

Rotor life is maximized

Automatic Rotor Life Management systems tracks the rotor usage precisely in the nearest of 0.1 time and 0.1 hours means, the rotor life is extended as much as 10 times longer than as conventional calculation. (by manual recording to the rotor log book)

Visual Balancing by non-contact imbalance sensor

Do you still adjust balance between sample tubes using scale or balance before the centrifugation? himac ultracentrifuge model CP-NX series offers visual balancing with max. 5mm sample surface difference between the sample tubes*1. (*1: except P21A2 rotor)
The visual balancing was realized by the non-contact imbalance sensor which monitors oscillation of the drive shaft during the rotation. Imbalance alarm criteria were optimized based on the characteristics of each rotor, so that system offers bigger imbalance tolerance. Of course, the sensor activates the imbalance alarm and stops rotation immediately in case the abnormal oscillation is detected.

Economy Mode * for energy saving

The stand-by electricity consumption is reduced max. 50%**, compared with our former model, by deeming the backlight of the LCD, stopping cooling fans, stopping cooling system and so on, if the control panels is not touched over the set period (setting range : 1 -180 mins). * The mode works while drive unit and vacuum pump are stopped
** under in-house test condition

Operating History : Max. 5,120 logs

Max. 5,120 operating logs can be recorded in the system automatically. You can export the data according to a user and/or rotor in CSV format through USB port.

Programmed Operation : 1,000 programs

You can register up to 1,000 programs for programmed operation to the system. Folder is used to manage the registered programs.You can select folder's color from 4 colors paired with a character for easy identification of the registered program.

User Lockout (standard function)

Operator can be registered to the system with 3-level access level (Administrator, Supervisor, User). Operational functions can be limited by the access level. You can register up to 50 users. Password should be entered to log-in the system.

Model CP100NX CP90NX CP80NX
Max. Speed (rpm) 100,000 90,000 80,000
Max.RCF (xg) 803,000
Speed Control Accuracy ±2 rpm (1,000 rpm to max. speed)
ACCEL/DECEL Mode ACCEL : 10 / DECEL : 11 (10 and coasting)
Set Speed Range 1,000 rpm to max. speed in increments of 100 rpm
Timer from 1 min to 999 hours 59 min (with 1 min increments) with HOLD function
Set Temperature Range from 0ºC to 40ºC with 1ºC increments (Accuracy : +/- 0.5ºC)
Vacuum System Oil rotary vacuum pump and oil diffusion pump
Operating Sound 51dB(A) (running at set speed, under in-house test condition)
Heat Radiation Into a Room 1kW or below
Cooling System Thermo-module cooling system (CFC/HCFC/HFC-free)
Control Panel Touch-sensitive color LCD panel (6.5 inch)
Data Communication USB : Host x 1, Devise x 1 / LAN x 1
Rotor Life Management Automatic Rotor Life Management for rotors with RLM adapter
Registered by serial number to the system for rotors with optical overspeed disk
Size (mm) 790 (W) x 690(D) x 880(H) (with door cover : 890(D))
Max. height to the end of the door handle : 925(H) / Height to the table : 863(H)
Floor area (m2) 0.81 (900 x 900 mm)
Weight (kg) 390
Power Single phase, AC200V, 208V and 220V +/-10%, Max. 20A (normally 8A)
Single phase, AC230V and 240V +/-10%, Max. 16A (normally 7A)
Installation Environment Ambient temperature for operation : 2ºC to 40ºC
Ambient temperature for performance guarantee : 10ºC to 30ºC
Standard CE marking qualified
Product Safety : EN61010-1 and EN 61010-2-020 Electromagnetic Compatibility : EN 61326-1
Warranty of Drive Unit 10 years after the shipment (Full warranty) *1
Part No. (Asia/Middle East) 901067C1 901068C1 901069C1
Part No. (EU market) 901067C2 901068C2 901069C2
Part No. (USA/Canada) 901067C3 901068C3 901069C3
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements

Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1 Service Visit
Service Visit 1PM
1 Service Visit
1 2
Parts and Labor    

Discounted Parts
Discounted Labor (As needed)

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.


Your trusted source for new, factory clearance & certified pre-owned lab instruments since 1995.

  • We routinely save discerning laboratories 30-80% with our recertified pre-owned and factory clearance instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - proof that your instruments pass through a rigorous re-certification process to ensure that it arrives at your laboratory defect-free and in full working order.
We are neither an auction company nor an instrumentation broker. GMI employs our own factory-trained engineers to ensure full control of this process.
Unlike small-time businesses and brokers, GMI goes beyond offering money-back promises. We offer real product warranties.
Apart from our meticulous inspection processes, GMI’s available warranties and multi-year service agreements guarantee customer satisfaction - no need to go through frustrating and time-consuming product returns!
Additionally, all items are thoroughly cleaned and professionally packaged/crated with care to insure they arrive in your lab ready for use.